气室无磁加热结构研究进展与展望

碱金属气室是原子陀螺、原子磁强计和原子钟等原子测量仪器的核心部件.原子密度主要受加热温度的影响,高均匀性、高稳定性的气室加热结构是保证碱金属原子密度稳定的关键技术,对提升原子测量仪器输出信号的灵敏度至关重要.回顾了目前常用的碱金属气室加热方法,针对加热层、传热层、保温层等组件,梳理和总结了碱金属气室加热结构的发展方向和发展历程,并在此基础上展望了未来碱金属气室加热结构的发展趋势.     

轻量化红外成像制导镜头设计与仿真

根据红外成像制导系统的轻量化、小型化、低成本发展需求，针对制导系统中的光学镜头进行轻量化设计。通过分析超透镜的波前调控原理和加工工艺，利用传输相位调控原理设计了基于硅和氟化钡材料的中红外波长超透镜，工作波长3 μm,镜头厚度小于1 mm，口径50 mm时重量小于10 g，热膨胀系数较低环境适应性好。利用时域有限差分法对超透镜进行了仿真，通过设置对称边界条件缩短了仿真时间。仿真结果表明，当超透镜数值孔径为0.45时，聚焦效率为85%，焦斑半高宽3.4 μm。     

不同强度磁暴期间热层大气密度响应特征分析

利用CHAMP卫星数据，对2002-2008年12个不同强度磁暴事件期间的热层大气密度变化特征进行分析，并研究对应磁暴期间大气模式NRLMSISE-00分布特征.结果表明，大磁暴期间日侧大气密度峰值从高纬到低纬的时间延迟为2h，中小磁暴期间的延迟时间为3～4h；春秋季暴时大气密度分布基本呈南北对称分布，而夏冬季大气密度的分布是夏半球大于冬半球，春秋季暴时大气密度大于夏冬季；NRLMSISE-00大气模式得到的热层大气密度很好的体现了半球分布以及季节分布的特征，但模式模拟结果偏小；Dst指数峰值比ap指数峰值更能反应大气密度的变化情况.      

空间目标碰撞概率的等效矩形域快速算法

针对线性相对运动假设下的碰撞概率计算问题，提出了等效矩形域方法。利用该方法将概率积分计算进行近似处理，推导出概率密度积分的解析表达式。针对空间目标误差椭球形状固定的情况，给出了最大碰撞概率的计算方法。对目标在交会时刻相距较远和接近碰撞的情况进行了碰撞概率以及最大碰撞概率计算。通过将计算结果与空间压缩无穷级数法的对比，验证了等效矩形域方法近似计算碰撞概率积分的可靠性，同时对于不同的碰撞概率计算情况，等效矩形域方法显示出更高精确度和更好的估计偏差稳定性。     

基于CMPSO算法的永磁同步电机转动惯量识别研究

永磁同步电机(PMSM)是一种具有很强非线性的动态系统,在工业驱动应用中发挥着重要作用。实时辨识转动惯量对于高精度PMSM系统控制和稳定性状态监测具有重要意义,但传统转动惯量识别方法精度较低。在传统离散模型参考自适应理论基础之上,用柯西变异粒子群优化(CMPSO)算法代替待辨识参数自适律设计环节,以实现PMSM转动惯量识别。该转动惯量辨识方法充分利用了CMPSO算法的快速高效收敛性,仿真结果和试验结果表明了可行性、正确性和准确性。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Anchoring Bolt Detection Based on Morphological Filtering and Variational Modal Decomposition

The pull test is a damaging detection method that fails to measure the actual length of a bolt. Thus,the ultrasonic echo is an important non-destructive testing method for bolt quality detection. In this research,the variational modal decomposition(VMD)method is introduced into the bolt detection signal analysis. On the basis of morphological filtering(MF) and the VMD method,a VMD-combined MF principle is established into a bolt detection signal analysis method(MF-VMD). MF-VMD is used to analyze the vibration and actual bolt detection signals of the simulation. Results show that MF-VMD effectively separates intrinsic mode function,even under strong interference. In comparison with conventional VMD method,the proposed method can remove noise interference. An intrinsic mode function of the field detection signal can be effectively identified by reflecting the signal at the bottom of the bolt.